Plaster sheeting is adhered to the Thermacell wall by using ordinary ‘stud adhesive’.
The adhesive is daubed in several places on the wall, the plaster sheet is then pressed against the wall.
Standard plasterers nails which come in various sizes, can be used to nail the sheeting into the concrete core of the wall. These hold the plaster sheet in place until the adhesive sets.
Plastering the Thermacell walls is quite simple and never gives any trouble.

IMPORTANT NOTE:
As per all rendering or plastering to achieve the best adhesion it is recommended that the wall surface be thoroughly cleaned down, removing any dirt or surface powder that may be on the surface. We suggest you use a yard broom be used to clean up and roughen all surfaces.